BT-6027 Wool Polishing Pad Finishing Pad

Cutting pads, polishing pads, and finishing pads are three types of sponge pads used in the polishing process. Each serves a distinct purpose, primarily defined by the level of abrasiveness and the stage of the polishing process they are intended for.

BT-6027 Wool Polishing Pad Finishing Pad 6 inch or 8 inch wool pads
6" Hook & Loop Wool Buffing Pad - Single Sided Cutting & Polishing Pad
8" 100% Wool Hook & Loop Grip Buffing Pad for Compound Cutting & Polishing for Automotive, Marine and Epoxies
Buff oxidized paint, orange peel, deep scratches, color sanding scratches and hard topcoats and clearcoats
Heavy cutting wool polisher pad for cutting, buffing and polishing with compounds, polishes and glazes

product details

Cutting Pads

- Purpose: Cutting pads are designed for the initial, more aggressive stage of polishing. Their primary role is to remove deeper imperfections from the surface, such as heavy scratches, oxidation, and swirl marks.

- Material: These pads are typically made from dense, firm foam or even microfiber or wool for extra aggressiveness.

- Abrasiveness: High abrasiveness. The material and texture are coarser, allowing the pad to cut into the surface and remove defects more effectively.

- Usage: Used with compounds that are designed to cut or level the surface, making it suitable for heavy correction tasks on automotive paint or other materials.

- Result: After using a cutting pad, the surface will be clearer but may have fine scratches or haze that need further polishing.

Polishing Pads

- Purpose: Polishing pads are used in the intermediate stage of polishing. They are designed to refine the surface after cutting, removing fine scratches, light oxidation, and swirl marks.

- Material: These pads are generally softer than cutting pads but still firm enough to remove minor imperfections.

- Abrasiveness: Medium abrasiveness. The texture is finer than that of cutting pads, allowing for a smoother finish without removing too much material.

- Usage: Typically used with a less abrasive polish or compound to smooth out the surface and enhance gloss.

- Result: After using a polishing pad, the surface should be smooth and shiny, with most defects eliminated.

Finishing Pads

- Purpose: Finishing pads are used for the final stage of polishing, where the goal is to maximize gloss and achieve a flawless finish.

- Material: These pads are made from very soft foam, sometimes even softer than polishing pads, and are designed to apply final polishes, sealants, or waxes.

- Abrasiveness: Low to non-abrasive. The texture is very fine, and the pad focuses on enhancing the surface's appearance rather than correcting defects.

- Usage: Paired with finishing polishes, glazes, or waxes, finishing pads help to bring out the highest level of shine and depth in the surface.

- Result: After using a finishing pad, the surface should have a deep, glossy, and reflective finish, free from any visible imperfections.

product details

Summary of Differences:

- Cutting Pads: High abrasiveness, used for defect removal.

- Polishing Pads: Medium abrasiveness, used for refining and enhancing gloss.

- Finishing Pads: Low to non-abrasive, used for final touch-ups and maximum gloss.

The choice between these pads depends on the condition of the surface and the desired final appearance.