Product Description

Follow these steps: (how to use with a clay prodcuts?)
 
1) Wash and dry your vehicle.
2) Adjust the spray bottle in a suitable amount of lubricant(The paint looks like a bead of water）.Spray a small area with clay lubricant, no bigger than 2-3 square feet.
3) Gently rub the clay bar back and forth across the wet area. It will grab at first. This means that it is pulling contaminants out of the paint. When it glides
freely, the paint is clean.
4) Wipe the area with a microfiber towel and use the clay lubricant to remove any clay residue. Rub your fingers across the paint now; it should be as smooth as glass. If it’s not, repeat the process. Reshape the clay bar as needed to expose a clean surface. Keep the clay well-lubricated.
5) Continue these steps until you’ve clayed the entire vehicle. Clay does a marvelous job on glass and chrome, too.
6) Store the clay bar in its original case if possible, or in an airtight plastic bag. Spray it with lubricant to keep it moist. Do not allow the clay to freeze and do not store it in temperatures above 200° F.
7) Always follow claying with a wax or sealant. Clay will removing existing wax and may leave tiny holes where contaminants have been removed. They must be sealed in order to protect the paint from corrosion.
Note: Detailing clay does not remove oxidized paint or fill in blemishes. If your paint is mildly oxidized, clean the paint with clay and then use a polish to remove the oxidized paint. If the oxidation is severe, polish first because the oxidized paint may flake off as you clay and ruin the clay bar.

Packing︰ 50 pcs/carton

Lead Time︰ 3-7 days

Standards Certificate︰ BSCI & ISO9001

Product Image